There's nothing better than a handmade gift. And what better way to celebrate than with some fun, festive coasters. These coasters are made from inexpensive tiles from the hardware store and are embellished with fun, designer scrapbook paper.
Make these coasters as a gift or make them for your home - either way, they are sure to get noticed!
Supplies:
4 square tiles from your local hardware store (4.25" x 4.25")
4 pieces of scrapbook paper (3.75" x 3.75")
4 pieces of felt (3.75" x 3.75")
Mod Podge
Sponge brush
Glue (i.e. Fabri-tac or other strong adhesive)
Clear acrylic sealer
5. After mod podge is dry, take tiles outside and spray with clear acrylic sealer. Follow manufacturers instructions. The sealer makes these tile coasters water-resistant.
Wrap four of these coasters up with some beautiful ribbon and you've got a gorgeous handmade gift.
And finally, grab yourself a cocktail and toast to a wonderful New Year!
Pin It
I saw these featured in the magazine and fell in love - GREAT job! Well done! Can't wait to try it myself!
ReplyDeleteThis is just beautiful! :) Thanks for sharing the tute. :)
ReplyDeleteAdin B
Such a great idea!! Match the coasters to the decor! What a great gift for new home owners, or just a birthday!
ReplyDeleteI am so going to try this. I hate to say it, but I have used my Christmas coasters all year long. I really need to do this craft!! Love it!
ReplyDeleteWhat great handmade gift idea! I just came accross your blog and I love it all ready!
ReplyDeleteI LOVE this tutorial and plan on using it to make some gifts during this new year! I featured your wonderful blog on my blog today. Make sure you stop by and check it out as well as possibly pick up a button! :)
ReplyDeletekaricorsi.blogspot.com
Beautiful...they have inspired me to use this great idea for some fun home decor!! Where did you get that beautiful paper?? I LOVE it!! I will definitely share when I get them done!
ReplyDeleteKate
www.bloemersfamily.blogspot.com
love the papers you chose- gorgeous!
ReplyDeleteand I love it that we have the same ikea white... were you tempted to get one of their fabulous patterns (like I was)? but my sister kept reminding me that all white is so much more uniform and less busy. AND if I need more, then I will be able to get the white ones but not the patterned ones- hahaha!
happy new year, friend!
Great idea! And gorgeous paper. Well done!
ReplyDeleteI actually just got a set at christmas from my mother in law...super cute..think i might make some more now that i know how and use some pictures instead of the scrapbook paper!!!
ReplyDeleteLOVE your photos, and this is one of the best coaster tutorials ever. You rocked them!
ReplyDeletegreat idea! I definitely think I am going to try this - thanks for sharing!
ReplyDeleteWhat an awesome project thanks for sharing I so can't wait to make some
ReplyDeleteVERY cute! And the idea above about using pictures is a great idea!
ReplyDeleteSo happy you posted this tutorial!! Can't wait to make some :) thanks!
ReplyDeleteThank you all for your super-kind words!! The paper I used is Amy Butler's and I found it at Michael's. I bought it in big packs of about 50 sheets each, so look for it in that section - you won't be able to purchase just individual sheets, but it's so great for many different projects!
ReplyDeleteVery cute! The Mom's Day Out program my son used to attend made these with photos of the kids as a Mother's Day gift last year. I think mixing them with scrapbook paper would make a great grandparent gift.
ReplyDeleteThese is a great idea for a housewarming gift. You can coordinate all colors and designs. Thanks for sharing. Can't wait to try it.
ReplyDeleteThanks for sharing ☺. Now all I have to do is find me some tiles.
ReplyDeleteGreat tutorial!! Going to have to try this myself at some point to use up some of my own paper. So happy to have found this!!
ReplyDeleteSaw these on At Second Street. They are absolutely lovely. New to your site, can't wait to look around more. I am definitely becoming a follower and I am going to add these to my to do list.
ReplyDeleteJust Another Day in Paradise
wow, they are awesome! thanks for sharing :)
ReplyDeleteIts a fantastic Blog. Once the tile and grout cleaning has been thoroughly cleaned and dried we will apply a grout sealer. This protective grout sealant absorbs into the grout to keep your grout clean and protect it from stains in the future.
ReplyDeleteJust stumbled upon your blog & it is wonderful! This is a great idea; keep up the good work!
ReplyDeleteI tried making one and it looks very good! I think I can even make a living with these coasters here in Sarasota! Tile coasters are something that my neighbors would love, I'm certain of it! After all, we are hand-made and DIY gift lovers here in Sarasota. Flooring companies can make whole bunch of beautiful tiles like this, I think - in case you guys are planning to stock up on beautiful tiles like this for your coaster project!
ReplyDeleteMaking these tonight, thanks for the idea!!!
ReplyDeleteI made some but used cork for the bottom instead... see here
ReplyDeletehttp://plcsewing.blogspot.com/2011/02/tile-and-paper-coasters.html
Wonderful idea - thanks for sharing. Found your link on Pinterest.com
ReplyDeleteBlessings all the way from the Middle East :)
I finally know what I'm going to do with my scraps! What a great idea this is.
ReplyDeleteThese are AWESOME!! Thanks for sharing! :):):):):):):):):):):):):)
ReplyDeleteThis is so great! Hey, how does mod podge hold up to heat? Would this work as a hot pad in the kitchen?
ReplyDeleteI have made coasters using one layer of cocktail napkins and modpodge. To finish though, I paint on about 3 coats of polyurethane. I had trouble finding a spray sealer that would withstand the heat from my coffee cup. Not sure how the poly would work with hot pan from the stove though. Am definitely going to give it a try. Could have a matching set - hot pad and coasters - by using a larger piece of tile.
DeleteI just made these coasters yesterday. They certainly came out beautiful and I appreciate the tutorial! Unfortunately they are non-functional, just merely decorative. I tested the coasters after one day of letting everything dry and my coffee cup got stuck on one of the coasters! lol! I will make these again on larger tiles and use them as decoration on my wall. I am dying to find something that will withstand heat from my cofffee cup. Have any of you ladies had any luck? Thanks again for the tutorial!
DeleteFound a similar tutorial here: http://twogirlsbeingcrafty.blogspot.com/2011/02/ramseys-finally-have-coasters.html?showComment=1339467501699#c4599863419468748000 . Made them before reading through all the comments and found out at the bottom that there is an engine sealant that's heat resistant to 500*F. Go check out the comments...
DeleteI found someone that said to use Envirotex Lite Pour-On High Gloss Resin or something similar. It is an epoxy that is used on counter tops and you will not have a problem with it! Thought I would share.
DeleteI had the same issue with the heat/moisture. Although the tiles looked pretty i couldn't rest anything on them without them sticking. I had tried a variety of Mod podges and sealants without success.
DeleteI then went to my local art supply store in Newtown. They sell a 'glass finish' resin, one of those things that you mix bottle A with Bottle B (it was about $24 and enough for about 12 tiles 10cm x 10cm). I used this over the top and its perfect. Its both heat and water resistant.
this is an awesome idea but it would also be awesome to make your own tiles or would that work with the paper and mod podge? but i was thinking more along the lines of a back splash behind the oven or tiles around the top of the kitchen counters.
ReplyDeleteThese are lovely!! I'm tempted to do something like this on the bathroom tiles in my new house, to spruce the place up... But as I'm renting, it'd have to be a temporary thing... Can the glue or sealer be dissolved in any way, do you know?
ReplyDeletei've made these EXACT coasters! same paper and all. great minds think alike=))
ReplyDeleteI just found this tutorial through Pintrest and I love these!! I have been racking my brain (and searching the internet) for ideas on what to do for 'favors' for my upcoming wedding. I think I might make two, wrapped with a bow for each guest at our wedding. Thank you so much!
ReplyDeleteSuper cute and easy. I just came across these on pinterest today. I am also a new follower.
ReplyDeleteHi there
ReplyDeletethese look fabulous, and i cant wait to have a go. Keep up the fabulous work and good luck with all your little children.
Yvonne
Just 4U Gifts and Wedding Ribbons
coiuld i ask what is mod podge (is it PVA glue)
Found these coasters on Pinterest - and just finished my first 2 sets! LOVE!!
ReplyDeleteJanice @ http://EquineGroove.blogspot.com
Hi there - love these. I made some today and linked back to your tutorial.:-)
ReplyDeleteThanks for sharing
Lowri
http://papervinenz.blogspot.com/2011/07/tile-coasters-and-mini-album-w-echo.html
Love,love,love! So cute!!
ReplyDeleteLoooooove this idea :)
ReplyDeleteI made some of these and linked back to your post. So cute!
ReplyDeletehttp://onebeautifulmotion.blospot.com/
I just found this on pinterest on Friday, went out & bought the supplies and got busy. It was my first Mod Podge project & I am hooked! I loved it, it was simple & they turned out great! I used a tan tile (with a little raised flat middle part, and sloping edges) and some neutral travel themed paper & they look like I bought them in a store! LOVE IT! Will make many more of these for myself & everyone else...thanks so much!
ReplyDeletefyi, I did this for a baby shower and it turned out really nice. Quick tips:
ReplyDeleteIf you're making a lot of these, put the felt on first & let dry, then after you put the paper on and they are stitting on your counter/table all day drying, the bottom of the tiles will not scratch anything they are sitting on.
Also, if you're making a bunch of these, just as an fyi do not stack them w/o the felt bottom (before they are sprayed with the top coat)b/c they will totally stick together. It's not the end of the world if they stick, but a few of mine had marks on them b/c in transport to the backyard for spraying, I had stacked them.
In the end, they turned out great. If you're doing this for a wedding or something extra fancy, I would recommend painting the edges white b/c it's a bit noticable when they are all stacked next to each other that they are tiles.
Hello, Mine stick even after using a acrylic sealer. I used cork on the bottom for a more professional look, could the cork somehow be causing the sticking?
DeleteI have the same problem. I used two coats of sealer and everything sticks to them. A couple were ruined from paper sticking to them!
DeleteIm having the same problem with the tiles sticking together even after using acrylic sealant. Did either of you ever find a solution. I'm thinking of adding another coat on top of everything of polyurthane from the hardware store.
DeleteIm having the same problem with the tiles sticking together even after using acrylic sealant. Did either of you ever find a solution. I'm thinking of adding another coat on top of everything of polyurthane from the hardware store.
DeleteIm having the same problem with the tiles sticking together even after using acrylic sealant. Did either of you ever find a solution. I'm thinking of adding another coat on top of everything of polyurthane from the hardware store.
DeleteIm having the same problem with the tiles sticking together even after using acrylic sealant. Did either of you ever find a solution. I'm thinking of adding another coat on top of everything of polyurthane from the hardware store.
DeleteIm having the same problem with the tiles sticking together even after using acrylic sealant. Did either of you ever find a solution. I'm thinking of adding another coat on top of everything of polyurthane from the hardware store.
DeleteLindsay,
ReplyDeleteI just made these coasters and I LOVE them except there are fine streaks from using the sponge brush to apply the modge podge. Have you encountered this problem and how do I prevent that from happening again? (I used the exact sponge brush you show in the picture and gloss modge podge)
Thanks
Christiana
I noticed this too, but if you notice in her picture with the ribbon tied around the stack, her's have them too. I didn't find a way around it, but instead used it to make it even better (in my opinion). Instead of painting it on in the same direction each time, I put a layer on going vertically, then the next horizontally. It gives it a really cool "cross hatching" texture. :)
Deletesurprisingly useful stuff, in general I picture this is worthy of a book mark, many thanks
ReplyDeleteI love this idea! I am totally using this idea for Christmas gifts for all the women in my family!! Thanks for sharing :)
ReplyDeleteI am making these for sure for the ladies in my family this Christmas. Thanks! Pinning this for sure!
ReplyDeleteThese are beautiful! I am going to make them as Christmas gifts this year with some cute holiday scrapbook paper. Thank you so much for posting this tutorial!
ReplyDeleteThese are beautiful!
ReplyDeleteHas anyone tried making these with fabric instead of paper? I have some beautiful scraps. Perhaps pink the edges and then podge on the same was as paper?
Hi,
ReplyDeleteI loved these tiles! We were thinking of making some and hanging them on the wall ( as art)..however I was wondering if you have any suggestions as to how to hang them on the wall without ruining them?
Again Brilliant work!
Amrita
Amrita,
DeleteYou can use plate hangers that you can buy at Hobby Lobby, Michael's, Joann's or any frame shop. Using these as wall hangings would be very cute!
You could always try Command picture hanging strips. I love those things, no holes in your wall, easy to take down and holds up pretty much everything I've ever tried.
DeleteLovely idea, thanks for sharing!
ReplyDeleteJust love it!!!! This is a great idea for christmas gifts...
ReplyDelete[url=http://diyymas.wordpress.com/][/url]
I LOVE these and just made them last night (finally)! Perfect gifts for m friends! So easy, fast, and of course adorable and functional! Thanks!!
ReplyDeletethis has so many uses!
ReplyDeleteI can see making them with grandchildren's pictures, or family members, and it is a keepsake.
Hi I made these last summer and sealed them with Mod Podge Gloss Clear Acrylic Sealer but they stick to the bottom of hot coffee cups. Did I miss something? thanx for any advice.
ReplyDeleteI love these, what a cute gift idea! I will definitely be making these for hostess gifts!
ReplyDeletethecraftycollegegirl.blogspot.com
hi can u tell me what Mod Podge is, cause i can't find that particular brand in my country. would appreciate your reply. thank u!
ReplyDeleteSo, I usually reply to each comment via email, but since I received several different questions, I thought I would respond here on the blog.
ReplyDeleteMod Podge is a brand of glue that dries clear. I'm not sure of another similar brand for those of you in other countries.
I haven't had any problems with my coasters sticking, but make sure they are completely dry before stacking them on one another. Also, I think I used Krylon Clear Acrylic Sealer, so maybe not all sealers are created equal. If the brand you used didn't work, try another one.
Also, yes, you could definitely do these and put them on the wall....just leave off the felt and they are still just like regular tiles. I bought the most inexpensive tiles at our local Home Depot. I think they were 16 cents a piece.
Fabric would be another great option! You could cut squares with pinking shears and use it just like the paper. The paper I used was from Michael's Craft Store and was a bundle of Amy Butler prints.
Hope this helps!!
Lindsay
The Cottage Mama
This is adorable! I tried it with my sister. We absolutely loved it! Family Christmas presents...check! Thanks!
ReplyDeletehttp://proverbs31susiehomemaker.blogspot.com/
I love the patterned paper that you used! I used self-adhesive cork for the bottom of the coasters which worked very well!
ReplyDeleteI started making these yesterday for Christmas gifts this year. I got a box of 80 4.25x4.25 tiles from Home Depot, bought a few scrapbook paper packs from WalMart, and bought the rest of my supplies from WalMart and Amazon. I still need to spray the acrylic on them and place the felt, but (so far) it's been SO easy and pretty fun! I bought a regular paint brush as a backup to the sponge brush and ended up using both depending on how well one was working on the tile, etc. I did have some issues with bubbles under the paper, but it's really not that noticeable (and I'm totally OCD about this stuff.) Anyway, thank you so much for the directions/idea and I'll post once they're all done! :)
ReplyDeleteAlright... huge problem that I would greatly appreciate advice on...
ReplyDeleteI just "finished" the coasters and they turned out beautifully... BUT I had flipped them over to glue the felt and assumed the acrylic sealer was dry (it felt dry and had been drying for 30+ minutes)... When I flipped them back over, parts of the newspaper print were stuck/transferred onto the coasters... I have tried EVERYTHING I can think of to get the print off... oil, baking soda, dish soap, hot water, toilet bowl cleaner, Comet, vinegar, nail polish remover, and toothpaste.
Any suggestions? :(
sealer takes at least 24 hours to dry
DeleteI started producing these kinds of last night with regard to Christmas gifts this year. I obtained any package of 70 Some.25x4.Twenty-five flooring from Home Site, bought a handful of scrapbooking cardstock provides coming from Supermarkets, and purchased the entire content of my personal supplies coming from Supermarkets along with Amazon online. My spouse and i still should spray the polymer-bonded with them and place your experienced, yet (up to now) it is often So simple and pretty fun! I purchased a consistent coloring remember to brush like a back-up on the sponge or cloth brush and also ended up employing each depending on how properly one ran your ceramic tile, etc. Used to involve some difficulties with pockets under the paper, however it is not really that noticeable (that i'm absolutely OCD about this stuff.) At any rate, thank you so much for the directions/idea and also I am going to article as soon as they're all accomplished!
ReplyDeleteHi, Have you experienced the coaters not being heat resistant? I made them and a regular coffee cup got stuck to the coaters.
ReplyDeleteThanks,
Brandie
Just saw these for the first time today! I am going to make these through out the year so I have them ready to give as gifts for Mothers Day or Christmas!
ReplyDeleteI totally just finished this and found your great project via pinterest -- will be posting shortly with pics to my blog =) http://fiftytwokbr.blogspot.com/
ReplyDeleteThis looks so easy and fun to do. Thanks for the tutorial. They turned out so pretty.
ReplyDeleteGood tip with the acrylic sealer...thanks!
ReplyDeleteWhat a fantastic idea- and so easy! I found you through pinterest, I love your blog!
ReplyDeleteOh my goodness. I love it. I am so excited another refreshing DIY to try. So loving your blog!
ReplyDeleteI have a friend who did this but used Christmas paper napkins. They turned out so cool!
ReplyDeleteLOVE this idea! This would make an amazing gift. And really the possibilities are endless!!!
ReplyDeleteThis is a great idea and your instructions were so easy to follow. I made some today and they turned out great!
ReplyDeleteI just made some of these last night and they look beautiful and can't wait to use them! However, I used the exact same acrylic spray you pictured and my tea mugs are sticking to the tile when I tested them =( Did you have this problem? Thanks for your help!
ReplyDeleteI had re-pinned this on Pinterest a week ago.. and today I got the supplies and completed 6 coasters! Thank you so much for sharing this great idea! Here's what mine looked like! (And a link to this page is attached to my photo pinned on Pinterest!) http://pinterest.com/pin/211598882462169437/ THANK YOU!
ReplyDeleteCan't wait to try this! But I want to use old holiday cards and wrapping paper. Thanks for sharing.
ReplyDeleteThis might sound like a silly question but do you know how much heat these coaster can withstand?
ReplyDeleteGreat tutorial thank you : )
I have made these and I run into the problem of them not being heat resistant either. I have tried a few different things including automotive sealer. The only thing I could find is that you would have to let them sit and "cure" for one month after putting acrylic sealer or polyurethane on them. They are water resistant as soon as they are completely dry and can be used for cold drinks but would have to wait one month for hot cups. Very frustrating for me :)
ReplyDeleteThis is a great tutorial thank you for sharing I can't wait to try it.
ReplyDeleteI found this project on Pinterest and completed it to participate in the Pinterest Challenge hosted by Young House Love. I just wanted to say that I loved doing this project and I am so pleased with the final product. I can't wait to use them and give a set as a gift. I blogged about my experience making your project for the challenge here: http://getcareydaway.com/2012/03/22/coasting/
ReplyDeleteThanks again for the wonderful tutorial!
Catie
I tried sealing mine with laquer, but it's not waterproof. The edges of the paper come up when the coaster gets wet. Is the acrylic sealant waterproof?
ReplyDeleteQuestion - I have made the tile coasters as you describe, but after drying for days and I stack them and tie with ribbon, the tabs I used on the back leave a mark on the tile they are on top of. Can you help me out with this.
ReplyDeleteI notice this question keeps getting asked, and nobody has a reply for this, and also no reply for heat resistant. These coasters are cute indeed, but I'm starting to believe they are for glamour only and not for use. I used cork on the bottom of mine and they stuck and left marks. I talked to a friend that does decoupage and she explained that ceramic doesn't absorb so this leaves all the piles of things we put on them, just sitting there on top and then sticking. No ill regards to the owner of this particular tutorial, I got mine from some where else, and I am thankful you posted this blog, cause I was looking for answers to this sticking issue, and I think I have the answer now.
DeleteI read that it can take up to 30 days for Mod Podge to cure. Not having worked with this product before I don't know whether this is fact or fiction but it might account for the "sticking" issue ethers have been asking inquiring about.
Deletewhat a beautiful blog!! can't stop admiring and smiling!!
ReplyDeleteThese are really neat. I have a question. Do I have to use scrapbook paper? Could I use printer paper. Let me know what you think. Thanks so much
ReplyDeleteWhat a great idea, and excellent lighting and photography, btw. I wanted to let you know that I featured you in my Mother's Day round up at: http://printabelle.com/?p=3016
ReplyDeleteIf you would like a featured button, I have one here on my About page: http://printabelle.com/?page_id=724
These are so cute, but was wondering about condensation & if anyone has had a problem with that since tiles are flat. Will the condensation run off the tile & onto whatever surface is around the coaster?
ReplyDeleteI made something like these and depending on the cup or glass, the condensation makes it stick-not because mode pose hasn't cured, but because of the suction that's created. It can ruin a good table when a tile coaster sticks to the cup then comes crashing down. I wonder if there is a solution to this problem? Didn't.t have an issue with the liquid from condensation running off the coaster though.
DeleteHi Everyone,
ReplyDeleteUsually I reply directly via email to readers questions, but since there seems to be so many questions about the finishing on the tiles, I thought I would post here too. I did not have any problem with my tiles in regards to condensation with the sealer. Personally I have not used them with hot beverages so I can't say whether or not that would be a problem. I'm sure climate is a factor in how well they dry. I would wait several days before trying to stack them on top of each other. So glad you guys love this project and if anyone has found a product that works better for sealing the tiles, please feel free to share it! Thanks so much!!
The problem I have is that the paper puckers after I put on the first coat of mod podge any ideas
DeletePainted tiles as shown above are excellent designing tiles for home renovations. Thanks for posting these presentations.
ReplyDeleteToo cute!
ReplyDeleteCan you do this with photographs instead of scrapbook paper? Maybe photos printed on computer paper?
ReplyDeleteThanks for the tutorial! I tried these using the exact same method & supplies you describe. The problem I'm having is that mugs holding hot liquids tend to stick to the coaster. Anybody else having this problem? Ways to troubleshoot?
ReplyDeleteI am having this issue too. I am going to autozone to get some clear coat heat resistant spray (they usually use it on car paint and on engines) I am going to spray it over the acrylic spray I used. I figured I'd experiment with that to see how it works. I'll let you know how it goes! I'd love for these tiles to be functional so I can give them out as gifts! Michaels arts and craft store has lovely christmas scrapbook paper so these are great gift ideas.
DeleteI made these once for a bridal shower, using the engagement pics of the couple, in black and white. Turned out so cute.
ReplyDeleteThanks for this easy tutorial,found it through Burlap and Blue blog. Ive been wanting to try this but wasnt sure if id be able to pull it off but,thanks to your easy tutorial I know I could do this!
ReplyDeleteUsing make up sponges works better because the streaks are not as deep. Also I've used something other than spray sealer because I live in a loft and can't really spray in or around my home. Great results!
ReplyDeleteDo you know what kind of sealant I can use that's heat resistant? A few of us are having issues with hot coffee mugs sticking to the tiles and leaving coffee mug rim marks. I'd LOVE to distribute these gifts over the holidays but I prob won't if I can't find anything to make them more functional. Maybe some heat resistant clear coat spray from autozone? I might try that. What do you think? Thanks for the tutorial though- they are pretty and mine came out great as well!
ReplyDeleteAmazing! You have a gift and we will be following you...
ReplyDeleteAwesome idea! :) These are so cute and added to the decor of our new living room furniture!
ReplyDeleteJust beautiful! Great idea....
ReplyDeleteUna pregunta... los papeles de bloc de notas, son papel o tela? lo digo porque si es papel... al mojarlo con la cola y el sellador no pasa nada??
ReplyDeleteI wanted to let you know I referenced your idea in my blog. http://kathleensreflections.blogspot.com/
ReplyDeleteThank you for all the time and effort you put into your blog.
Before you select a material you will need to decide what surface the tile will be applied. Tile can be placed as a backsplash behind a stove, or on the wall to the underside of the upper cabinets. Tile is a popular countertop material, and can also be used on the kitchen floor.
ReplyDeleteHi! I wanted to let you know I saw this tutorial on Pinterest and shared a link to your tutorial and referenced your blog on my blog! Thanks!!
ReplyDeleteitswhatkeepsmesane.blogspot.com
CAn you use fabric instead of paper?
ReplyDeleteGreat blog. Very helpful for people that want to try this at home with your instructions. Very creative. thank you for sharing!
ReplyDeleteI LOVE these coasters, they are gorgeous!! Thank you for sharing this wonderful tutorial as well. I hope it's okay, I just finished a paper crafts round-up showing ways to use pretty paper for home decor and just couldn't help but feature your pretty coasters. You can see it here:
ReplyDeletehttp://jamiebrock.hubpages.com/hub/20-DIY-Home-Decor-Ideas-using-Decorative-Paper#
Thank you so much for sharing :)
These are fantastic! I had a friend show me how to make them and they turned out great. So here's another semi-unrelated question: I'm giving them as teacher appreciation gifts at the beginning of the school year. Does anyone have a cute saying I can put on the gift tags? I'd like to include something with coast or coaster but I don't want to insinuate "coasting" through the school year (it's a TOUGH job)...any ideas? Thought about using something like don't "sweat" it (condensation from glass...), but not sure I like it...THANKS for any suggestions!
ReplyDeleteLovely! You should be giving us, a great plan, as how to make tiles beautiful in house, by your creativity. I will try these formulas, to make tiles, beautiful.
ReplyDeleteHey Lindsay I really liked your collection. Your handmade products are very informative. Can we use them as send gifts to my friends?
ReplyDeleteTip: use the side of a credit card to smooth out any bumps in paper! @spaliliana
ReplyDeleteBeautiful idea---I am coming late to the game here judging from all the comments but am reading all the other suggestions and think that everyone has some additional great ideas to help make these beauties even better. Thanks for the tutorial!!! Great idea!
ReplyDeleteSoft finish includes vinyl and cork tiles, all softer and warmer underfoot than most hard tiles and generally less costly. These tiles are easy to clean and lay, and, in the case of vinyl, available in an extensive range of designs.
ReplyDeleteTried with napkins first time around. Didn't turn out good at all. Found your blog and tried again with paper. Love it! I have a few months until Christmas, so it should be enough time to let them dry. Thank you for the cute idea!
ReplyDeleteI am hooked. You saved me of trying to decide what handmade items to make for Christmas gifts. Yours are gorgeous. Thanks alot. Great tutorial.
ReplyDeleteI've been pinning a lot of DIY coasters lately, but yours take the cake. Thanks for the clear and easy tutorial. Now I know what to do with all of those wallpaper samples I have!
ReplyDeleteVERY cute! And the idea above about using pictures is a great idea!
ReplyDeleteLove the colors/patterns on yours! I tried some myself!
ReplyDeleteCheck them out at stephklann.wordpress.com :)
The problem I have is that the paper puckers. Any ideas fellow crafters?
ReplyDeleteI'm having the same problem with heat resistance. Has anyone tried the automotive heat resistance sealer yet? Did it work? Thanks for the feedback!
ReplyDeleteNot sure if this will truly work, but I googled the heat resistance problem and found a few mentions of using PermEnamel clear gloss glaze (by Delta)as a solution. It is specifically for glass, ceramic, and tile and the description on one site states, "Dishwasher safe and microwave and oven safe to 350 degrees. Not for use on surfaces with food contact." I made my coasters today but I will need to go out and find this product to seal them better!
ReplyDeleteI'm making these tonight for a bridal shower this weekend. I bought wedding themed scrapbook paper and also purchased some large letter stickers to place on the paper - for the first letter of their last name and also number stickers to add the date of their wedding to a couple tiles. Just to make it a little more personalized. I see, though, from your picture that you used gloss mod podge. I've never worked with mod podge and there were many different kinds at Michaels. I, unfortunately bought matte mod podge. Should I exchange it? What difference will this make on my coasters?
ReplyDeleteHow did it come out with the matte mod podge? I'm making these coasters right now and only have the matte mod podge...but I'm going for it and hoping for the best! :)
DeleteI love this project! I made two sets last night and I'm already planning 5 more for parts of holiday gift baskets! they are so fun and easy. :)
ReplyDeleteAt the tile store right now!! Can't wait to start this craft tonight! I'll be making at least six sets of awesome coasters for Christmas gifts.
ReplyDeleteI have finally found a use for the giant stack of scrap booking paper I have!!! Thank you so much!!!
Where did you find all that gorgeous paper?
ReplyDeleteLove!! and they were super easy to do! thank you :)
ReplyDeletei attempted to do this last year and bought a bunch of tiles and never got around to doing it. man these look greaT! love it. you have inspired me to make this attempt again.
ReplyDeleteI am also having a problem with the paper puckering... I am using standard scrapbook paper from hobby lobby... any ideas??? Thank you!!!
ReplyDeleteannzasowski@gmail.com
What a fantastic idea- and so easy! I found you through pinterest, I love your blog!
ReplyDeleteYou did your job perfectly.pak gift is one of most reliable shop to send gifts… send gifts to Pakistan
ReplyDeleteI've made 4 sets of coasters in the past 2 days. So easy and they make fabulous gifts. Instead of felt, I used foam, cut into 4" squares and glued them to the bottom of the tiles with "Weld Bond". I found that the foam prevents them from slipping/sliding. As far as sealant, I used Valspar Clear Sealant (in a satin finish. This dreid very quickly anf I've had no problems with tiles sticking together.
ReplyDeleteDid you see if hot mugs stuck to them? I'm currently making them to sell and am having a heck of a time finding a sealer that hot mugs won't stick to. I don't want to do the engine sealer, as it has a VERY strong smell! I am about to try the Valspar you used and the PermEnamal mentioned in another post.
DeleteVery cute! Can't wait to make some!
ReplyDeleteI am in the process of making coasters as well and emailed the company that makes Envirotex (the thick stuff they put on bars). It's waterproof and heat resistant. Their comment is below. Hope this helps. Mary
ReplyDeleteAfter your coasters have cured for three days, put a layer of paste wax on each coaster; the cups stick when the coating is new-ish and usually stop sticking after the coating has cured for a few weeks! The wax will get you past that curing period.
This was so great, I was inspired to make my own version after seeing yours on Pinterest. Clearly I am not alone - everyone seems to love this. Thanks for the great inspiration! I linked to you on a post about it, over at Painting Sunny right here: http://paintingsunny.com/2013/03/18/before-blog-projects-part-1/
ReplyDeleteThanks for post! Wow nice Tiles Collection Tile Shops Totally Home improvement Solution TFO in australia.
ReplyDeleteThose are adorable. I love it's designs, very attractive to the eyes. I have been wanting to make these coasters but, i'm still busy as of the moment. Now, after seeing this, will surely set aside a time for my coaster project! :) -http://www.jrsalescorp.com
ReplyDeleteWhat do you think about the different types of area rugs over at Rugman.com?
ReplyDeleteOptics Patent News
ReplyDeletewinning lottery numbers
ReplyDeleteI really like your bold 'in-your-face' close ups of larger designs on these coasters. I have been making these for years but have only made them using paper napkins. Thanks so much for sharing and just in time with summer here and lots of time to try new things!
ReplyDeleteLis
It seems a lot of you have problems with mugs sticking to the surface of coasters. I had that problem in the beginning too. I found out that the best solution is to use two components hobby epoxy resin (something like this: http://www.tapplastics.com/product/mold_making_materials/casting_products/easycast_clear_casting_epoxy/386. Since I live in Croatia I use other kind, but it's the same principle). It solves both problems as it makes coasters heat and water-resistant.
ReplyDeleteIn the floor tile shop right this moment!! Cannot wait around to begin this particular art this evening! Soon we will be producing a minimum of 6 units associated with amazing coasters with regard to Presents.
ReplyDeleteI possess lastly discovered a make use of for that huge collection associated with scrapbook papers I possess!!! Thank you!!! Italian design ideas